Wakol D3055 Universal Primer 10KG

• The subfloor as well as the room climate conditions must meet the requirements of the applicable standards and data sheets.
• Subfloors must be permanently dry, solid, level, free from cracks, dirt and adhesion-inhibiting substances. Use a suitable mechanical procedure to remove separating layers.
• Mechanically pre-treat and thoroughly vacuum-clean calcium sulphate screeds according to the manufacturer's specifications or according to the applicable standards and data sheets.

Shake the container well before using. Apply the primer on the subfloor using a WAKOL Primer Roller or a velour or foam roller, without letting the substance pool. Complete subsequent bonding work after the primer has completely dried; pay careful attention to drying times.

• Processing not below floor temperature of +15 °C and room temperature of +18 °C, as well as room humidity preferably between 40 % and 65 %, maximum 75 %.
• All information is based on approx. 20 °C and 50 % relative air humidity. Warm up all laying materials in due time in heated room undefined.
• Comply with the approvals for each of the parquet adhesives. Do not use WAKOL D 3055 Parquet Primer under levelling compounds.
• The only exceptions to this rule are partial fillings using WAKOL Z 640 Filling Compound, WAKOL Z 645 Filling Compound or WAKOL Z 505 Repair Compound, fine.
• We guarantee the uniform high quality of our products.
• All data is based on tests and many years of practical experience and refers to standardised conditions.
• The variety of materials used and the different construction site conditions, which lie beyond our control, preclude any claims based on this data.
• We therefore recommend making sufficient trials. Accompanying flooring manufacturer's instructions and the current national standards must be observed.